Skip to main content

International Pipe is a company that allows primary and secondary tubing source of stainless steel. While these two goods are very similar, their variations in quality mean that they have very different applications. This article discusses what these are and can be used optimally for these two styles of structural tubing.

Structural Steel Pipe- What Is It?

Structural steel pipe is the steel that is manufactured into tubes for construction purposes, either main or secondary. For different applications, it comes in several dimensions, distances, forms and thicknesses. It must follow all steel quality requirements and pass all the necessary checks in order to be graded as primary steel tubing. These standards are set and revised and republished annually by the American Society for Testing and Materials (ASTM).

The quality monitoring systems used in steel production are multifaceted and produced steel pipes are tested on various levels. The first is the composition of metallurgists. A steel sample is taken and tested for its composition i.e. the ferrite, graphite, perlite, cement, austenite and other compounds. A steel pipe fabricator is needed use it ideally for better result. The microstructure of the steel allows us to consider how, under such circumstances, the final product would behave.

Besides metallurgy tests, mechanical tests will be carried out in order to assess a comprehensive range of physical characteristics, including stiffness, hardness, stress, ductility, fatigue, impact, compression, corrosion and machinability. It can only be treated as primary structural steel when the steel pipe passes these checks in line with ASTM requirements.

Steel, not necessarily unsuitable, that does not pass those tests. Their usage is only minimal. In this category of steel pipe, the surrounding surplus pipe can also be defined as a secondary pipe if you like, including new material that was not generated according to full ASTM standards or left outside the building projects (called “limited use and “secondary” pipe). Both are known as secondary stainless steel tubing. As we will clarify, the value and usage of both main and secondary pipes.

Application of Primary Steel

Primary steel is sold on the primary materials market and is safe for a range of purposes in building, engineering and transport, as all relevant requirements have been met.

Secondary Steel Applications

Two types of secondary steel exist, as mentioned above: used and new surplus. In a construction project, the recycled steel pipe was used previously and still could well be reused. Surplus stainless steel pipe was either purchased or never used for a specific project, or the steel mills were rejected for not meeting all of the necessary requirements. It is available in all grades and kinds and can be used in many industries.

Like primary stain, secondary steel, depending upon its consistency, is often used for piling. It is also used well for surface cabineting in the oil industry. There are pipe lines that are used to shield water sands from leakage in oil and gas pools at low depths or to avoid fracking fluids leaking into the surrounding soil.

Then, surplus steel ranges from almost primary to use in consistency. In any case the primary market cannot be sold. This means that the secondary stainless steel market provides great opportunities for low-price relatively high quality goods.

Reach International Pipe & Supply for steel pipe fabricators in OKC.